01
UV / moisture-cure coatings
Review board illumination, shadowed regions, film thickness and repair method.
Enquire about this seriesMOISTURE / INSULATION / PROTECTION
Conformal coatings
Thin-film protection for boards and electronics exposed to moisture, condensation, oil and corrosion.
Material features
- Moisture and oil resistance
- Thin-film application
- Inspection and repair
Selection criteria
- 01Application method and film thickness
- 02Masking and inspection
- 03Operating environment and repairability
PRODUCT SERIES
Product series by application
02
Acrylic protective coatings
Review application, drying, substrate, masking and operating environment.
Enquire about this series
03
Nano water-repellent coatings
Thin-film protection for water repellency and moisture resistance on PCBs and electronics. Review components, coverage, film thickness and environment for each grade.
Enquire about this seriesPRODUCT LINEUP
Product lineup
A featured board-protection coating grade. Review illumination, shadowed areas, application conditions and inspection.
Board-protection coatings
| Grade / product | Material type | Applications to review |
|---|---|---|
| UV5220Enquire | UV / moisture dual-cure coating | PCB and electronic-board protection processes |
Quote the grade or product name in your enquiry. Composition, numerical properties and use conditions are provided in current product-specific TDS and SDS.
APPLICATION & SELECTION
Coverage and coating conditions
Design coverage, keep-out areas, film thickness, drying, curing and inspection as one board-protection process. Separate condensation, splashes and oil exposure when reviewing materials.
Board moisture protection
Condensation, temperature/humidity and protected components.
Evaluation focusCheck coverage and electrical behaviour after exposure.
Masking around contacts
Keep-out areas at connectors, contacts and test points.
Evaluation focusInspect application boundaries and edge coverage.
Repair and rework
Component replacement, removal and recoating process.
Evaluation focusCheck appearance, thickness and function after rework.
PROCESS ENGINEERING
Masking, cure and inspection
- Define protected areas
- Mask and apply
- Verify drying and cure
- Check film & function
TECHNICAL REVIEW
Thickness, coverage and exposure
For numerical specifications, refer to the current grade-specific TDS.
- Film thickness and coverage
- Include edges, areas under components and keep-outs.
- Drying and curing
- Confirm equipment conditions and process time against grade records.
- Environmental behaviour
- Specify actual temperature/humidity and contacting oils or chemicals.
- Reworkability
- Check board and material changes after removal and recoating.
Frequently asked questions
Does a thicker film always protect better?
The required thickness depends on grade and use. Evaluate coverage together with drying, curing and component effects.
DOCUMENTS & SAMPLES
Documents & evaluation samples
Request the information you need for product selection and internal evaluation.
Explore application requirements
Automotive applications
Explore automotive lubrication alongside bonding, sealing and electronic protection by component.
Electronics & semiconductor
Organize bonding, sealing, thermal transfer and board protection around process and reliability needs.
Appliances & housing
Address appliance drive units involving food machinery, plastic gears, quiet motion and tactile feel.